How To Upgrade Operating System To Windows 10

Windows 10 32-fleck to 64-fleck upgrade (Image credit: Windows Central)

Windows 10 can run on both 32-bit and 64-bit processor architectures. If you lot accept a computer with a 32-bit setup, you can upgrade to the 64-bit version without acquiring a new license. The only caveat is that there is no in-place upgrade path to make the switch. The only choice is to perform a clean installation of Windows 10.

Although each version delivers the same features, when yous upgrade to the 64-scrap (x64) version, the device will exist able to accept reward of large amounts of memory (up to 2TB) instead of the 4GB limitation with 32-bit (x86).

The ability to access more memory allows yous to run more apps simultaneously without affecting the feel, and y'all can work with a mix of both 64-bit and 32-chip programs. Likewise, and perhaps more chiefly, it volition help you amend productivity on memory-intensive tasks. For example, when rendering videos, running virtual machines, and opening many tabs on your web browser.

In this Windows 10 guide, we will walk y'all through the steps to upgrade a calculator from 32-bit to the 64-bit version using an existing genuine license.

• How to check 64-bit hardware support on Windows 10
• How to upgrade from 32-bit to 64-fleck on Windows 10

How to check 64-bit hardware back up on Windows 10

If you want to upgrade a organisation from Windows 10 32-bit to the 64-chip version, yous first need to determine whether the processor has 64-bit support, 2GB of retentivity, or more, and whether the remaining parts accept support for 64-bit drivers.

Determine 64-flake compatibility using Settings

To check whether the processor can run the 64-bit of Windows ten, utilise these steps:

1. Open up Settings.
2. Click on System.
3. Click on Nearly.
4. Check the Installed RAM details.
5. Confirm that the data reads 2GB or higher.
6. Under the "Device specifications" section, check the Organisation type details.
7. Confirm the information reads 32-bit operating system, x64-based processor.

Source: Windows Central (Image credit: Source: Windows Central)

Once you complete the steps, you can determine whether the device is running the 32-bit version of Windows ten on a 64-bit processor. Nevertheless, if it reads 32-scrap operating system, x86-based processor, the computer does not support the 64-chip version of Windows.

If the device tin can't run the 64-scrap version, consider purchasing a new device that meets the organization requirements.

Determine CPU compatibility using Coreinfo

Although most computers using relatively modern hardware can work with any version of Windows 10, y'all notwithstanding want to confirm that the 4 essential features are present on the processor:

• Physical Address Extension (PAE).
• No-eXecute (NX).
• Streaming SIMD Extensions two (SSE2).
• CMPXCHG16b (CX16).

To confirm the processor has the required features, you can utilize the Microsoft Coreinfo command-line tool with these steps:

1. Open the Microsoft Sysinternals website (opens in new tab).
2. Click the Download Coreinfo link.

Source: Windows Central (Image credit: Source: Windows Central)

3. Correct-click the Coreinfo.aught folder and select the Extract all pick.
4. Click the Extract button.

Source: Windows Central (Epitome credit: Source: Windows Cardinal)

5. Type the following control in the accost bar and press Enter to open Command Prompt in this folder location.cmd

Source: Windows Central (Image credit: Source: Windows Central)

6. Type the following control and press Enter:coreinfo
7. Search (Ctrl + F keyboard shortcut or Ctrl + Shift + F on Terminal) for these features:
   • PAE.
   • NX.
   • SSE2.
   • CX16.

Source: Windows Central (Image credit: Source: Windows Central)

After you complete the steps, if the tool confirms that the features are bachelor, y'all can upgrade to the 64-fleck version of Windows ten.

While the upgrade procedure should be able to confirm the processor compatibility, the "Coreinfo" tool allows you to bank check these features alee of fourth dimension.

Make up one's mind driver compatibility

As well, it's recommended to bank check whether other components (such as graphics and sound cards) are uniform with the 64-bit version of Windows x.

If the reckoner has the 32-bit version of Windows 10 and the hardware is relatively new, there is a good chance that you will find 64-flake versions of the drivers. You can cheque the device manufacturer back up website to ostend that the components have drivers for the x64 architecture.

How to upgrade from 32-bit to 64-bit on Windows 10

A Windows x product key gives yous the option to install the 32-bit or 64-chip version. The only caveat is that you can't perform an in-place upgrade. Instead, you must delete the previous setup and perform a make clean installation to alter architectures.

As office of the compages upgrade process, you have to use the Microsoft Media Creation Tool to create a USB bootable media by connecting a USB flash bulldoze of at least 8GB of space to the figurer, and then utilize these steps:

1. Open up Microsoft download page (opens in new tab).
2. Nether the "Create Windows 10 installation media" department, click the Download Now push button.

Source: Windows Central (Image credit: Source: Windows Fundamental)

3. Double-click the MediaCreationToolxxxx.exe file to launch the tool.
4. Click the Accept button to agree to the terms.
5. Select the Create installation media (USB flash drive, DVD, or ISO file) for some other PC selection.

Source: Windows Central (Image credit: Source: Windows Central)

6. Click the Next button.
7. Clear the Use the recommended options for this PC option.
8. Select the right linguistic communication and edition of Windows 10 for the new installation.
9. Select the 64-fleck (x64) option for "Architecture."

Source: Windows Central (Epitome credit: Source: Windows Fundamental)

10. Click the Next button.
11. Select the USB flash drive option.

Source: Windows Central (Image credit: Source: Windows Central)

12. Click the Next button.
13. Select the USB flash drive to create the bootable media.Quick tip: If you don't run across the flash bulldoze, reconnect the device, click the Refresh bulldoze list option, and select the bulldoze from the list.

Source: Windows Key (Image credit: Source: Windows Central)

14. Click the Adjacent button.
15. Click the Cease button.

Once you lot complete the steps, the tool will proceed to download the installation files, and it'll create the bootable media compatible with Windows 10 64-bit.

If you don't have a USB wink drive, you can find many reliable and inexpensive drives (for example, the SanDisk Cruzer Glide CZ60 32GB) on Amazon.

Storage essential

(opens in new tab)

SanDisk Cruzer Glide CZ60

If you lot need a flash drive to create a Windows x bootable media, the Cruzer Glide CZ60 past SanDisk is a good option. The flash drive offers 32GB of storage and reliable information transfer speed to perform a Windows installation and store files on the become.

Windows 10 32-bit to 64-scrap install

When you lot are set up to upgrade to Windows 10 64-scrap from 32-bit, before proceeding, you may need to change some settings to allow the computer to start from a USB flash drive. This requires accessing the Basic Input/Output Organisation (BIOS) or Unified Extensible Firmware Interface (UEFI) on the motherboard to modify the boot lodge.

Ordinarily, the process requires hit one of the function keys (F1, F2, F3, F10, or F12), Esc, or Delete primal as soon as you start the calculator. However, the instructions can be different depending on the manufacturer and even per device model. Equally a result, you may need to check the manufacturer'southward support website for more specific details.

After accessing the firmware, open up the "Boot" bill of fare page, configure the boot order to starting time from the USB flash drive, and save the changes.

Alert: This is a friendly reminder that yous will exist making changes to the current setup, which may crusade bug and even data loss if you don't do this correctly. Before proceeding, it'southward recommended to make a temporary full backup of your PC. It's likewise a good idea to create a copy of your files to an external drive or OneDrive, every bit you'll have to restore them after the upgrade.

To switch from the 32-bit to 64-bit version of Windows 10, employ these steps:

1. Commencement PC with USB flash drive.
2. On "Windows Setup," click the Next button.

Source: Windows Central (Image credit: Source: Windows Central)

3. Click the Install At present push.

Source: Windows Central (Prototype credit: Source: Windows Key)

4. Click the I don't have a product central link to continue (assuming that the computer was already properly activated).

Source: Windows Central (Image credit: Source: Windows Key)

5. Select the edition of Windows 10 (if applicable). This selection must match the edition of the license activated.

Source: Windows Cardinal (Paradigm credit: Source: Windows Key)

6. Click the Next button.
7. Bank check the I accept the license terms selection to continue.

Source: Windows Fundamental (Image credit: Source: Windows Central)

8. Click the Next push.
9. Click the Custom: Install Windows only (advanced) selection.

Source: Windows Cardinal (Paradigm credit: Source: Windows Central)

10. Select the sectionalisation with the current installation of Windows 10 (usually "Drive 0"), and click the Delete button to remove the partition from the hard drive.Quick tip: If you lot see multiple partitions on the primary hard drive (Drive 0), select and delete each one. Windows x will recreate the required partitions during the installation process automatically. It's not necessary to remove the partitions on secondary drives.

Source: Windows Central (Prototype credit: Source: Windows Key)

11. Select the empty drive labeled "Drive 0 Unallocated Space."
12. Click the Next push button.

Subsequently you complete the steps, the setup will install the 64-bit version of Windows x on the laptop or desktop estimator.

One time the installation completes, y'all will take to continue with the on-screen directions to terminate the out-of-box feel (OOBE) to create a new business relationship, configure the preferences, and cull the privacy settings.

It's as well a good idea to check for updates on Settings > Update & Security > Windows Update to ensure that the latest patches and drivers are installed.

Finally, remember to restore your files from backup and reinstall your applications, including those designed for the 32-bit or 64-scrap version of Windows x.

More Windows resources

For more helpful articles, coverage, and answers to common questions about Windows ten and Windows 11, visit the following resources:

• Windows eleven on Windows Central — All you lot demand to know
• Windows 11 help, tips, and tricks
• Windows ten on Windows Central — All you need to know

Mauro Huculak is technical author for WindowsCentral.com. His primary focus is to write comprehensive how-tos to help users become the most out of Windows x and its many related technologies. He has an It background with professional certifications from Microsoft, Cisco, and CompTIA, and he's a recognized member of the Microsoft MVP community.

Source: https://www.windowscentral.com/how-upgrade-32-bit-64-bit-version-windows-10

Posted by: clevengerheaden.blogspot.com

Share this post