How To Make Bootable Usb Windows 7 Using Cmd

Gone the former days of DVDs, no 1 uses DVD to install Windows now. The best and suitable option is to make a flash deejay bootable using cmd and install Windows 10 or eight.1 & 7. There are some tools to create bootable USB drive or Pendrive. But why would you lot install a third-political party app when you lot can brand a bootable flash drive using cmd (command prompt)?

Flash drives are not but useful to transfer information merely you tin can use them for different purposes. One of them is to install Windows XP, seven, 8/8.one, or Windows 10. Even you tin install Linux OS as well.

Probably every computer owner owns a USB wink drive which makes it easier to install whatsoever version of Windows on your PC.

Cmd is a powerful tool to perform different tasks if you know the commands. Third-party tools tin help to make wink bulldoze bootable including Microsoft Official USB Installer. These tools practice zilch merely automate the process.

Many such tools have limitations and take a long time to format and write Windows files into the USB flash drive. Some tools besides cost money.

How To Make Flash Bulldoze Bootable Using CMD (Command Prompt)

Here is a unproblematic mode to turn USB flash bulldoze into bootable media to install any version of Windows like XP, 7, 8, 8.1, and Windows x.

All you demand is a flash bulldoze with a storage capacity of 4-8 GB. 4 GB for Windows XP, 7, 8, and 8 GB for Windows 8.1 and 10, and the downloaded iso file of Windows.

Follow these steps to make flash drive bootable using cmd-

i. Insert your Wink Bulldoze and go to outset, search for CMD.

ii. Correct-click on it and Run as Administrator.

3. Once the control prompt is open.

Type diskpart and hit enter. Information technology will enter into the disk partitioning management fashion.

4. Typelist deejay and hit enter. Here you tin can see all the disks on your figurer, it doesn't testify disk partitions but a listing of the continued deejay into your calculator.

5. After yous get the list of disks, detect your flash drive by its size. Here mine is 14 GB which is Disk 2.

Now let's select the flash bulldoze by typing select disk <deejay no.> eg select disk 2 and hitting enter.

half-dozen. Once the USB flash drive is selected type make cleanand hit enter.

This command will erase everything from the flash drive. Make sure it does not incorporate your important files.

7. Now you lot need to make your wink drive a main sectionalisation to practice so-

Type create division primary and hit enter.

8. Once the disk is a master segmentation you need to make information technology an active drive.

Type active and hit enter on your keyboard. The command will activate the wink drive.

9. Now you have to format the flash drive.

Type format fs=fat32 quick and hit enter. This command will format the wink drive in quick mode.

FAT32 files organisation works with Windows 8.ane and the lower version of Windows. But if you lot are installing Windows ten and then you demand to utilise an NTFS disk.

Windows ten contains a file names install.wimthat is larger than 4GB. FAT32 does not support copying files larger than 4 GB.

So you demand to format as format fs=ntfs quickand it will piece of work.

The early version of Windows ten supported FAT32 simply Windows 10 version 1903, 1909, 2004, & 20H2 do not back up FAT32. So apply NTFS instead.

ten. One time the flash drive is formatted you may non see it on My Calculator.

To get information technology back you demand to assign a literal to it, type assign and hit enter.

All done y'all just fabricated your USB flash drive bootable using cmd, close this command prompt past typing exitand hitting Enter.

Install Windows 10, 8.1 & seven Using a USB bootable wink drive

The bootable USB is gear up, y'all can copy the Windows files and ready to go.

1. You demand to copy windows files from the PC to the flash drive. If you have a .iso file of Windows then extract it using win rar.

ii. Later extracting windows files copy all files and paste them to the bootable Flash drive.

Information technology may have some time to copy the files since Windows files have around 4 GB on the disk. The speed also depends on the flash drive. Utilise USB 3.0 flash drive on the same port for a faster transfer charge per unit.

After transferring Windows files to a flash drive yous are set up to install Windows on any computer using this flash drive. Remove and re-insert flash disk and it volition get windows setup icon which confirms that it is bootable media now.

Watch this video tutorial to brand flash drive bootable

To install Windows by this bootable flash drive insert it into the computer and hitting the kick key. From the listing of bootable devices select your flash bulldoze and proceed to Windows installation.

Related– How to Install Windows 10 From USB Flash Drive [With Screenshots]

Conclusion

USB flash drives are handy tools to install Windows on any computer. You just need to make it bootable. Don't rely on tertiary-party apps for bootable USB, cmd can do this task with few commands within a minute.

Make certain you take a good flash drive. USB 2.0 is now older, use USB 3.0 wink drives for faster transfer rate hence the faster installation.

If you don't have a USB iii.0 flash drive then get a Faster USB 3.0 Flash Drive from Amazon which has a transfer speed up to 225 MB/s.

After making the flash drive bootable y'all can also keep your data forth with Windows files that won't affect Windows installation.

Must Read

Ultimate Tips to Make Windows 8/eight.ane Faster than Ever
How to Set up Tiresome Running Windows x – 200% Faster PC
Brand Chrome Faster By Fixing High RAM Memory Usage

How tin can I tell if my USB is bootable?

MobaLiveUSB is a small program to bank check if the USB drive is bootable or not. Copy the files to wink bulldoze and run it from the drive. Use the Qemu engine to cheque.

Can you reuse a USB after making it bootable?

Yes, you tin copy files to USB bulldoze along with Windows files. Or delete the Windows files and employ information technology every bit you want.

Can I merely copy ISO to USB?

You can re-create the iso file to transfer it from i PC to some other but you can't install Windows. Extract the iso files and copy them to bootable USB to install Windows.

Source: https://www.itechfever.com/make-flash-drive-bootable-cmd/

Posted by: clevengerheaden.blogspot.com